Оптикал кабеле Co.
Адреса: Шейнанг, Лионанг, Китан
Контакт ҫын: Manager Zhang
Телефон: 400-964-134
Мобилен телефон: 86 1390405338
?
2025-06-17 31
Anchoring clamp ADSS cables serve as termination points, while suspension clamps support mid-span. Here's how they compare:
FeatureAnchoring ClampsSuspension ClampsLoad Capacity8-12 kN4-6 kNMovement AllowedZeroLimitedInstallationTerminal PointsMid-SpanCost20-30% HigherMore Affordable
According to IEEE Std 1222-2024, proper anchoring reduces cable failures by 37%.
Termination points at poles/towers
High tension zones (>8kN loads)
Angle changes exceeding 15°
Vibration-prone areas near highways
Long spans over 150 meters
⚠ Warning: Never use suspension clamps as substitutes - our team saw a 2025 project in Texas fail because of this $120k mistake.Www.adsscable.cn
Installing ADSS cable anchoring clamps correctly matters:
Clean the cable (use alcohol wipes)
Mark positions (follow manufacturer specs)
Assemble hardware (don't mix components)
Torque bolts (35-40 Nm typically)
Final inspection (check for cable deformation)
Pro tip: Always leave 2-3mm clearance at the throat - we learned this the hard way during a windy Chicago installation last winter.
Modern anchoring clamp ADSS cable systems use:Www.adsscable.cn
Hot-dip galvanized steel (for corrosion)
Neoprene inserts (vibration damping)
Aerospace-grade aluminum (lightweight)
Fun fact: The rubber compounds in quality clamps can last 25 years - 3x longer than cheap alternatives.
Keep your clamps in top shape:
✅ Annual torque checks
✅ Inspect for galvanization wear
✅ Monitor cable movement marks
✅ Verify rubber pad condition
✅ Document tension changes
While pricier, anchoring clamp ADSS cable systems deliver unmatched security for critical infrastructure points. Suspension clamps work fine for routine spans, but never compromise on termination points.
Www.adsscable.cn